Cookies help us deliver our services. By using our services, you agree to our use of cookies.
Sitemap
View the sitemap for this website below, with links to each of the pages and brief descriptions of what to find in each section
Products
- Tube PEEK 0.13x1524mm, 1.6mm
- Tube PEEK 0.13x5000mm, 1.6mm
- Tube PEEK 0.18x1524mm, 1.6mm
- Tube PEEK 0.18x5000mm, 1.6mm
- Tube PEEK 0.25x1524mm, 1.6mm
- Tube PEEK 0.25x5000mm, 1.6mm
- Tube PEEK 0.5x1524mm, 1.6mm
- Tube plastic, 3/32 x 7/32 in., 1/pk
- Tube PTFE ESD 1_6-0_8
- Tube T sampling valve
- Tube vent stainless steel
- Tube(44mm),replacement,1 tube basket
- Tube, 1/16in, SS 304, 375mm long
- Tube, 11 IN
- Tube, 520MM
- Tube, assembly tool PTFE
- Tube, needle-6 port valve,Siltek
- Tube, pressure check
- Tube, probe to 6-port valve,deactivated
- Tube, sampling, Tenax TA, conditioned, capped with 1/4-inch brass caps, etched with serial number, UNITY
- Tube, stainless steel, Carbograph 1, for pumped C5 to C14 and diffusion of BTX
- Tube, stainless steel, empty, 10/pk
- Tube, stainless steel, Tenax, preconditioned/capped, 10/pk
- Tube, stainless steel, universal, 10/pk
- Tube, Tee to Pressure PCA
- Tube, UI 1/16 in, 0.010 in x 1000 mm
- Tube, vent deactivated
- Tube,1/16 inch w/ 1/8 inch bulkhead ftg
- Tube-PTFE-ESD-1 6-0 5
- Tube-PTFE-ESD-2 0-1 0
- Tubes(25mm),rplcmnt,6 tube bskt,set of 6
- Tubes(38mm),rplcmnt,3 tube bskt,set of 3
- Tubes, Versaplate-Plexa Das, 30Mg 500/P
- Tubes, Versaplate-Plexa Das, 30Mg, 96/P
- Tubing ,red OD 1/32 in, V2P2, 70 in
- Tubing + connector kit, VGA 77 ICP, 1/pk
- Tubing 0.53mm Deactivated 5m, 1/pk
- Tubing 1.6id x 1.6 wall Ketone resistant
- Tubing 1/8in id x 1/4in od x 1/16in wall
- Tubing adapter for peri pump tubing 2/pk
- Tubing and connector kit for VGA-77 1/pk
- Tubing and connector kit, VGA 76. 1/pk
- Tubing and connectors kit - axial ICP
- Tubing and connectors kit - radial ICP
- Tubing and connectors kit, Liberty ICP
- Tubing assy, solvent flush for G2258A
- TUBING ASSY,1L,SAMP AND RET(6),708DS
- TUBING ASSY,1L,SAMP AND RET(8),708DS
- TUBING ASSY,2L,SAMP AND RET(6),708DS
- TUBING ASSY,2L,SAMP AND RET(8),708DS
- Tubing Assy,2L,Samp Cannula(8),8000
- Tubing Assy,BioDis(8),F/Lure to SmplCann
- Tubing Assy,BioDis(8),M/Lure to M1/4-28
- Tubing Assy,Flared,Ret Can Vlv,3x3,8000
- Tubing Assy,Flared,Ret Cannula(8),VK8000
- Tubing Assy,Flared,Samp Can Vlv,3x3,8000
- Tubing Assy,Samp/Return (8),Vseries
- Tubing Asy,BioDis(8),F1/4-28 to Ret Cann
- Tubing clamps (small 10/pk + large 5/pk)
- Tubing Clip
- Tubing clip
- TUBING COLORD PTFE/.042 50ft length(4X2)
- Tubing Connector Leak Kit
- Tubing for Drainage (4.0mm id, 2.5m)
- Tubing for funnels of G1364-84502, 10/PK
- Tubing for Gas Line,PTFE,3.0mm ID,5m
- Tubing for reaction cell gas, 1/pk
- Tubing holder, PEEK, micro flow neb.
- Tubing Kit 140mm - Ultra Clean Tubing
- Tubing kit 140mm, 2/pk
- Tubing Kit 15-40ml-min ID 0.8
- Tubing Kit 1-5ml-min ID 0.25mm
- Tubing Kit 1ml-min ID 0.15
- Tubing kit 270mm, 2/pk
- Tubing Kit 40-100ml-min ID 1.2
- Tubing Kit 4-8ml-min ID0.5
- Tubing kit axial ICP low volatile+glass
- Tubing kit axial ICP low volatile+inert
- Tubing kit degasses to pump
- Tubing kit for SIPS 10/20, 1/pk
- Tubing kit for UV/VIS OQ/PV tests, to flush flow cell of Agilent 8453 UV-Vis spectrophotometer. Includes tubing, fittings, adapter
- Tubing kit for vacuum repl.Chamber
- Tubing kit radial ICP low volatile+glass
- Tubing kit radial ICP low volatile+inert
- Tubing Kit Sampling-Unit
- Tubing kit, Agilent 8453 UV sipper system
- Tubing Kit, App 3/7, 1/4-28 fittings
- Tubing kit, argon humidifier 7900 ICP-MS
- Tubing kit, dual pathlength Total Sol(9)
- Tubing Kit,8 Sets of 2 Tubes,TotSol
- Tubing L300mm EL
- Tubing polyurethane 1/8 x 1/4 in, per ft
- Tubing polyurethane 4mm id x 6mm od, 1/m
- Tubing PTFE (.125od x 0.065id)in. per ft
- Tubing PTFE 1.0mm id x 0.3mm Wall, per m
- Tubing rinse supply SPS 4, 2.5mm id x 1m
- Tubing s/chamber-peri pump waste line/m
- Tubing s/chamber-torch 1/4 in id, per m
- Tubing Tygon s/chamber-torch, organic /m
- Tubing VGA-76/77, GLS to abs. cell, 1/pk
- Tubing w/guide 0.15 id, 1.6 od, 70cm 5/p
- Tubing w/guide 0.2id, 1.6od, 70cm, 5/pk
- Tubing w/guide 0.3id, 1.6od, 70 cm, 5/pk
- Tubing, beige, 1/32, sipper V1P3,7in 3pk
- Tubing, beige, OD 1/32 in, 60 in
- Tubing, bg, 1/32, V1P2-V1P5, 3.4in 3/pk
- TUBING, COLORED PTFE/.032 50ft 6Lgs(3x3)
- TUBING, COLORED PTFE/.042 50ft 6Lgs(3x3)
- TUBING, COLORED PTFE/.042,50ft 8 lengths
- Tubing, fs, 2.5m x.32mm,1/pk
- Tubing, fused silica, 0.32 mm, uncoated, deactivated, 1/pk
- Tubing, gray OD 1/32, V3P1-V1P6, 8 in
- Tubing, grey, 1/32, V3P3-V3P4, 2.5in 2pk
- Tubing, Halar white, 1/8in, V1P4, 33 in
- Tubing, heat exchanger, fluorinated ethylene propylene (FEP), 12 cm, Agilent 89090A Peltier temperature controller
- Tubing, peristaltic pump, 3-bridged, purple/white tabs, PVC Solvaflex
- Tubing, peristaltic pump, Tygon, 1.3 mm id, 3-bridged, flow rate 3.4 to 4.1 mL/min (at 50/60 Hz mains frequency), Agilent 8453 UV sipper system
- Tubing, peristaltic pump, Tygon, 2.8 mm id, 3-bridged, flow rate 15.9 to 19 mL/min (at 50/60 Hz mains frequency), Agilent 8453 UV sipper system
- Tubing, PFA, for gas supply to nebulizer, 3 mm id, per m
- Tubing, PTFE, 1.6 mm od, 10 m, Agilent 8453 UV sipper system
- Tubing, red, 1/32 in, V1P1-V2P6, 6in 3pk
- Tubing, red, OD 1/32 in, V2P4, 13 in
- Tubing, red, OD 1/32, V2P1, 16 in
- Tubing, Regulator carrier, out
- Tubing, Solenoids to 6-Port, Deactivated
- Tubing, SS 14.17in long
- Tubing, stainless steel, pre-treated, 0.21 mm, 1/8 in od, 10/pk
- Tubing, UltM,10 ft, 1/8 in, 0.016, 1/pk
- Tubing, UltM,35 ft, 1/8 in,x 0.016mm
- Tubing,PTFE,16cm with fittings,3mm od
- Tubing-flexible 0.97-in-Cuff-ID 1.02-in-
- Tubing-solvent resistant 0.093-in-ID, 2m
- Tubing-solvent resistant 0.187-in-ID, 2m
- Tungsten - W, Uncoded HC Lamp, 1/pk
- Tungsten Lamp assembly, G1315A, 8453
- Twin needle seat assy for G2258A
- Two Stage Pressure Regulator for Argon
- Tygon tubing (3m), for ICP-MS
- Tygon Tubing for peristaltic pump 2/Pk
- UHP-FF Fitting, bio-inert
- UHPLC Grd,AB Peptide Plus,3mm,2.7um,3pk
- UHPLC Grd,AB PeptidePlus,2.1mm,2.7um,3pk
- UHPLC Grd,AB PeptidePlus,4.6mm,2.7um,3pk
- UI Ultra Inert Union No Fittings
- UIB Clamp Guide Infinity II Kit
- u-LC needle for G1329 autosampler
- Ultimate Plus deactivated fused silica tubing, 10 m, 0.15 mm
- Ultimate Plus deactivated fused silica tubing, 10 m, 0.18 mm
- Ultimate Plus deactivated fused silica tubing, 10 m, 0.25 mm
- Ultimate Plus deactivated fused silica tubing, 10 m, 0.32 mm
- Ultimate Plus deactivated fused silica tubing, 10 m, 0.53 mm
- Ultimate Plus deactivated fused silica tubing, 30 m, 0.25 mm
- Ultimate Plus deactivated fused silica tubing, 30 m, 0.53 mm
- Ultimate Plus deactivated fused silica tubing, 30 m, 32 mm
- Ultimate Plus deactivated fused silica tubing, 5 m, 0.15 mm
- Ultimate Plus deactivated fused silica tubing, 5 m, 0.18 mm
- Ultimate Plus deactivated fused silica tubing, 5 m, 0.53 mm
- Ultimate Plus deactivated fused silica tubing, 5m , 0.32 mm
- Ultimate Plus deactivated fused silica tubing, 5m, 0.25 mm
- Ultimate Plus deactivated fused silica tubing, 6 m, 0.12 mm
- Ultimate Plus deactivated fused silica tubing, 6 m, 0.18 mm
- Ultimate Plus deactivated fused silica tubing, 6 m, 0.53 mm
- Ultimate Union Kit, Deactivated
- Ultimate Union Kit, non-deactivated
- UltiMetal Plus capillary tubing, 50 m, 0.5 mm od, 0.25 mm id
- UltiMetal Plus capillary tubing, 50 m, 0.5 mm od, 0.32 mm id
- UltiMetal Plus capillary tubing, 50 m, 0.8 mm od, 0.53 mm id
- UltiMetal Plus Guard Column (Retention Gap) 5m, 0.8 mm od, 0.53 mm id
- UltiMetal Plus guard column (retention gap), 10 m, 0.8 mm od, 0.53 mm id
- UltiMetal Plus guard column (retention gap), 2 m, 0.5 mm od, 0.25 mm id
- UltiMetal Plus guard column (retention gap), 2 m, 0.8 mm od, 0.53 mm id
- UltiMetal Plus transfer line, 10 m, 1/16 inch od, 0.25 mm id
- UltiMetal Plus transfer line, 10 m, 1/16 inch od, 0.75 mm id
- UltiMetal Plus transfer line, 2 m, 1/16 inch od, 0.25 mm id
- UltiMetal Plus transfer line, 2 m, 1/16 inch od, 0.75 mm id
- Ultimetal Tubing, 1/16 x 1.0 mm
- Ultimetal Tubing, 1/8 x 2.1 mm
- Ultivo PM Kit
- Ultra Clean Tubing Kit for G4220A
- Ultra Clean Tubing Kit for Infinity II
- Ultra Inert Universal Press Fit, 10/pk
- Ultra Ion Source Chamber
- ULTRA-2 Intuvo GC column module, 50 m, 0.32 mm, 0.52 um
- UltraInert Universal PressFit Y-Splitter
- Ultra-micro cell quartz, 1mm 8uL. 1/pk
- Ultra-micro rectangular cell, UV quartz, open with PTFE stopper, 10mm pathlength, 50uL 1/pk
- Ultra-micro rectangular cell, UV quartz, open with PTFE stopper, 2mm pathlength, 10uL 1/pk
- UM tubing methyl deactivated 10m x0.25mm
- UM tubing methyl deactivated 10m x0.76mm
- UM Tubing Methyl Deactivated 2m x 0.25mm
- UM tubing methyl deactivated 2m x 0.76mm
- UM+ Tube 1/16 in 0.020 in x 1000mm CPM
- Undeactivated Fused Silica, 10 m, 0.05 mm, 0.36 mm OD
- Undeactivated Fused Silica, 10 m, 0.075 mm, 0.36 mm OD
- Undeactivated Fused Silica, 10 m, 0.10 mm, 0.36 mm OD
- Undeactivated Fused Silica, 10 m, 0.18 mm, 0.34 mm OD
- Undeactivated Fused Silica, 10 m, 0.20 mm, 0.34 mm OD
- Undeactivated Fused Silica, 10 m, 0.25 mm, 0.35 mm OD
- Undeactivated Fused Silica, 10 m, 0.32 mm, 0.43 mm OD
- Undeactivated Fused Silica, 10 m, 0.53 mm, 0.67 mm OD